How To Fill HPA Tank With Air Compressor

Using an air compressor to fill an HPA tank is an easy and inexpensive way to guarantee that you continually have a consistent supply of air for your paintball or airsoft video games. How to fill HPA tank with air compressor nicely and efficiently with no issues if you adhere to the step-by-step instructions given in this blog. You can play actively for hours and give up along with your HPA tank if you take top care of it. So prepare for a thrilling day in the world by moving ahead of time, grabbing your gear, and getting organized!

Can You Fill HPA Tank With An Air Compressor?

Yes, you may use an air compressor to fill an HPA tank, to put it simply, but there are a few important factors to take into care.

Make sure your air compressor can deliver the necessary pressure for the task. The usual PSI required to fill an HPA tank ranges from 3,500 to 4,500 PSI, which is outside the capability of the majority of regular household compressors, which normally only have a 125 PSI maximum pressure. It is necessary to purchase a high-pressure air compressor designed specifically for filling paintball or airsoft tanks.

Put your safety first at all times. If a typical household air compressor is utilized without sufficient filtering, the compressed air may become contaminated, which could eventually result in tank damage. A robust filtration system must be in place since compressed air must be cleared of any impurities before it can enter your HPA tank.

A majority of the air compressors we use at home or in workshops have a maximum output pressure of roughly 150 PSI (pounds per square inch). However, pressures for HPA tanks for paintball or airsoft are normally between 3000 and 4500 PSI. 

Required Material To Fill An HPA Tank With An Air Compressor

The following supplies and tools are required to use an air compressor to fill an HPA (High-Pressure Air) tank:

1. HPA Tank ( 3000 PSI or 4500 PSI).

2. Air Compressor 

3. Pressure Gauge

4. Bleeder Valve

5. Hoses

6. Safety Gear 

7. Adapter or Fill Station

8. Oil/Water Separator

9. Lubrication

10. Power Source

11. Workspace

12. Instruction Manual

13. Maintenance Tools

14. Ventilation

How To Fill HPA Tank With Air Compressor (Step-by-step Guide)

1. Check the Hpa Tank: 

It’s crucial to assess the state of affairs of your HPA tank before beginning the air compressor filling operation. Make sure there aren’t any apparent signs of damage or damage, and that it is a way in the right jogging order. Examine the outdoors of the tank for any rust, dents, or leaks. Additionally, confirm that the tank is interior its hydrostatic test date due to the truth that expired tanks have to be disposed of and can be dangerous.

2. Connect the Air Compressor: 

Connecting your HPA tank to an air compressor is the subsequent step after making sure that it’s miles safe to use. Turn off all of the related devices in addition to the air compressor to begin. Next, find your HPA tank’s fill nipple and, if applicable, put off the protecting cap. The next step is to choose an adapter that fits the threading of your specific tank and, if important, use a wrench to firmly fasten it to the fill nipple. 

3. Install the Pressure Regulator: 

The majority of contemporary air compressors let you modify the output pressure using a regulator knob or gauge control panel. For information on how to set up the desired pressure level suited for filling an HPA tank (usually between 3000 and 4500 PSI), consult your owner’s handbook. By taking this precaution, you can avoid overfilling or underfilling your HPA tank, which could affect its functionality or perhaps result in an accident while in use.

4: Open the Bleeder Valve 

The bleeder valve is an essential thing that ensures the safe and careful filling of your HPA tank by releasing any trapped air or moisture in the device. Find this little knob-looking mechanism at the pinnacle of your tank, typically placed at the fill nipple, to get right of entry to the bleeder valve. Turn the knob counterclockwise whilst firmly gripping the tank until you concentrate on a hissing sound. 

5. Start the Filling Procedure 

Once all connections and fastenings are secure, start your air compressor and let it build pressure until the desired level is attained, as indicated by the regulator setting. Utilizing an air compressor to fill your HPA tank is possible if you adhere to the detailed directions in this document. If you take a few quick actions, your tank will be filled and ready for use.

6: Monitor Progress and Shut Off 

Simultaneously with filling an HPA tank with an air compressor, tracking the improvement and information even as to shut off are vital steps. It is critical to maintain a normal test on the strain gauge while the tank procedures its most potential. This will enable you to prevent overfilling, which also can pose a danger to your device’s protection or cause harm.

Additional Tips For Filling An HPA Tank With An Air Compressor

1. Verify that the fittings and adapters in your air compressor are suitable for attaching it to an HPA tank. Since distinctive tanks ought to have extraordinary valve designs, it is vital to have the correct gear to prevent leaks and harm.

2. Verify that your air compressor can reach the tank’s maximum fill stress before you begin filling it. It can be risky to overfill the tank considering it may burst or maintain damage.

3. Whenever you fill your HPA tank, ensure it’s far stable. It couldn’t be secure to use if there are any wear or damage signs, which include dents or cracks.

4. To keep away from any leaks for the duration of filling, ensure all connections between your air compressor and the HPA tank are tight and stable.

5. pay unique attention to the strain gauges in your air compressor and the HPA tank while filling. This will enable you to maintain an eye fixed on the quantity of stress being carried out and ensure you do not pass above cautioned limits.

6. Instead of trying to fill your HPA tank immediately, think about filling it in stages in case you’re using a smaller air compressor with a smaller capability. This keeps the compressor from overheating and lets in moisture construct-up from condensation in the compressor to release all through fills.

7. When the usage of an air compressor to fill up an HPA tank, be aware of the encompassing temperature, especially if you’re doing it outdoors or in an area without temperature control.


With the proper device and expertise, filling an HPA tank with an air compressor is a straightforward manner that may be finished conveniently. You can guarantee a safe and powerful fill every and whenever by way of following those tips. Don’t neglect to confirm your tank’s strain rating and alter the compressor settings for this reason. Examine and keep your gadget on an ordinary foundation to save you from injuries or functional issues. Exercise gives you the self-belief to play on the sphere without interruption and to replenish your HPA tank. So pass in advance, make yourself to be had, and have a wonderful time!

Related:- How To Use Air Compressor To Inflate Tires?


Can I use any air compressor to fill my paintball tank?

No, you need to use a specifically designed air compressor that can fill the tank up to 4500 PSI. The air compressor needs to be heavy-obligation and feature a regulator so you can fill the tank slowly and lightly.

What is the difference between an HPA tank and a CO2 tank?

An HPA tank is packed with compressed air, at the same time as a CO2 tank is packed with carbon dioxide. HPA tanks are generally taken into consideration to be better for paintball weapons because of their constant airflow, which leads to greater accurate shots.

Is it bad to fill an HPA tank with a low-pressure air compressor?

Yes, it’s no longer encouraged to fill an HPA tank with lower air stress. This is due to the fact the strain within the tank needs to be balanced so as for it to paint well. If the pressure is simply too low, the tank won’t feature nicely and will even explode.

Are compressed air cans better than an air compressor for filling an HPA tank?

No, compressed air is not encouraged for filling an HPA tank. This is because the pressure inside the tank needs to be regulated to prevent it from exploding. Compressed air doesn’t have a regulator, so it’s now not safe to use.

Leave a Comment